Note that there have been some application upgrades since 1.2, but not much, as I have been working on Slackpup, Wary and Woof in the interim. I expect that most, maybe all, apps in Wary will work in Quirky, so the 'puppy-wary' repo can be in the PPM.
1.3 is built with the 220.127.116.11 kernel and also has the commercial Nvidia Xorg driver. The .iso file is 112MB -- note, if I had built without the Nvidia driver it would have been 107MB.
Release announcement and release-notes (which does not mention that it is RC):
Download the live-CD (112.5MB):
Download the development .sfs (104.8MB):
There are also delta files from 1.2:
I have not built a "retro" Quirky this time, as I am targeting Wary for that purpose.
Comments:Posted on 20 Sep 2010, 20:47 by perthie
Quirky 1.3 Looks Good
I tried a variety of frugal installs to different media and they all worked.
When I run the SNS, it pops up a yaf-splash message in a font that is almost unreadable.
Posted on 20 Sep 2010, 21:41 by perthie
I made a GRUB-bootable flash drive and put Quirky 1.3 in /puppies/quirky.
GRUB booted it successfully by just using "pmedia=usbflash".
Posted on 20 Sep 2010, 22:03 by DaveS
Wonderfully sane Barry. EVERYTHING I use working including Abiword :)
About to throw SM 2.1 alpha 3 at it!
Posted on 20 Sep 2010, 22:12 by DaveS
Seamonkey 2.1 Alpha3
Works just fine.
Posted on 20 Sep 2010, 22:12 by perthie
Wrong Samba Client
Quirky 1.3 still has the old /opt/samba package with the deprecated smbmount and smbspool commands.
I believe that Wary has the samba-client-3.0.37-s131 package which works properly with both Windows shared folders and printers.
Posted on 20 Sep 2010, 23:11 by perthie
On a frugal install to a hard drive, pfix=nocopy appears to be the default, even if the machine has lots of memory. I have to use pfix=copy to make the sfs load into RAM.
FWIW, pfix=nocopy frees up a lot of memory with no significant loss of speed on my everyday machine.
Posted on 20 Sep 2010, 24:08 by gjuhasz
Pwallpaper does not work
Thanks, Barry. Quirky 1.3 seems to be very fast and stable.
Static Seamonkey 2.1b1 unpacked on HDD then linked - works fine
Compatible with VirtualBox / VMware
Country localization OK
Pwallpaper does not work (no need for this: ROX backdrop is enough)
Creates swap file despite of an existing Linux swap partition.
Posted on 20 Sep 2010, 24:19 by Terryphi
Just upgraded my frugal install and this version is very fast! Congratulations.
Posted on 21 Sep 2010, 8:07 by capoverde
No X and no net?
Booted Quirky 1.3RC (MD5 check OK) with pfix=ram to ignore the former qrkysave.3fs. Very fast: seemed to work fine, the only little hitch was that no new background could be set, as reported by gjuhasz.
After rebooting, saving-to-file and choosing the new savefile, X wouldn't start anymore with Xorg (1280x1024x24, Intel graphic card). Vesa worked, but the screen was a bit shifted: oh well, the monitor's autocorrection got things straight.
But the connection was gone too: oddly, the dialogs of both connecting apps said no network interface was detected! Had to reboot with LuPu 5.1 to post this (...phew, for a minute I doubted that my embedded ethernet card was defunct...).
Posted on 21 Sep 2010, 16:57 by BarryK
Quirky 1.3RC forum thread
Lobster has started a forum thread for bug reports;
Posted on 22 Sep 2010, 8:07 by 01micko
Hi Barry.. are you aware of this driver compiled by tempestuous?
It works well for me on my old P3.. I installed it pfix=ram and straight online. With ndiswrapper there is a minor bug. If I choose SNS I get to select the driver but no 'wlan0' button appears, so I go to Dougal's and try to load ndiswrapper that way, it reports 'no new interface detected'. I go back to SNS and the 'wlan0' button is there.. go figure? It was the same in lupu-510, but 511 playdayz included the acx driver at my urgency, straight online with it in SNS. Can you include it in the next Quirky?
For those watching on, when I installed the pet pfix=ram I ran..
then the interface appears in SNS.