Wary Puppy 5.0 released

After many betas and one RC, I finally decided to go for the first official public release, version 5.0. Wary is a parallel development to our other flagship Puppy, Luci Puppy (also known as Lucid or Lupu), but with a different target market: older hardware.

Here is a short release announcement:

Wary Puppy is intended to be our on-going commitment to older hardware. Puppies built with recent Linux kernel and X.org may not work properly on older computers. In particular, some analog dialup modem drivers cannot be compiled with recent kernels. Another major area is old video hardware not working with latest X.org drivers. Many of our leading-edge puppies are built with recent kernel and X.org, however Wary is built with an old kernel (currently 2.6.31.14) and X.org 7.3 so as to provide better drivers for the older hardware. However, Wary is in all other respects at the leading-edge like the other puppies, with recent applications, and support for all modern peripherals (printers, scanners, cameras, digital modems, etc.). Wary is also built with the latest Woof, so has the same infrastructure as other recent puppies.

The packages used to build Wary were originally compiled from source in T2, then binary PET packages created. Wary is now built with PET packages, with a small but growing repository. As Wary is intended to be a long-term-supported project, there will be no major upgrade, only incremental improvements such as application upgrades and bug fixes. Thus, the PET repository will remain viable for years ahead and will continue to grow as developers contribute packages.


To find out more about what Wary is all about and relationship with other flagship Puppy releases such as Luci (Lucid), read this:
http://bkhome.org/wary/

The full 5.0 release announcement and release notes:
http://distro.ibiblio.org/pub/linux/distributions/quirky/wary-5.0/release-Wary-500.htm

At the time of writing, Wary files have not propagated through to the ibiblio.org mirrors. They are available here:
http://distro.ibiblio.org/pub/linux/distributions/quirky/wary-5.0/
http://distro.ibiblio.org/pub/linux/distributions/quirky/wary-5.0/wary-500-readme.htm

When the files become available soon on the mirrors, they will offer faster downloads. See links via the Puppy download page:
http://puppylinux.com/download/

Acknowledgements
So many people helped, and I won't attempt to name everyone as I am sure to miss some people. Instead, a general thank you to everyone. Just mentioning a couple of names: thanks to ttuuxxx and Billtoo who contributed PETs for the 'puppy-wary5' repository, and stu90 for the desktop background image.


Posted on 29 Dec 2010, 6:42


Comments:

Posted on 29 Dec 2010, 6:17 by BarryK
Wary 5.0 forum feedback
I have started a thread on the Puppy Forum for feedback:

http://murga-linux.com/puppy/viewtopic.php?t=63400



Posted on 29 Dec 2010, 7:57 by broomdodger
slideshow pet?
Is there an app for doing a slide show?
-Bill



Posted on 29 Dec 2010, 12:12 by BarryK
Re slideshow
Yes. Do some research on the image viewing PETs, you will find some that do slideshows, ex Fotoxx. Also, Viewnior, in this Wary 5.0, does full-screen slideshows very nicely.

If you mean automated slideshows, that is different. I think that there is an app that does that, can't recall what offhand. You need to ask on the forum.


Posted on 29 Dec 2010, 13:53 by broomdodger
Re slideshow
Yes, automated slideshows.
Display an image every 5 seconds.
I want to setup a Puppy to do slideshows for a friends cafe, indiajoze.com
He travels the world, culinary anthropology.
Barry, if you are ever in Santa Cruz, California I will treat you to dinner.
-Bill


Posted on 29 Dec 2010, 14:03 by broomdodger
Re slideshow/screensaver
I suppose being able to point a screensaver to a folder of images would be good enough.

Is that possible?
-Bill



Posted on 29 Dec 2010, 14:31 by broomdodger
Re slideshow
Viewnior, in this Wary 5.0, does full-screen slideshows very nicely.
Thank you, that is exactly what I was looking for.
-Bill


Posted on 29 Dec 2010, 18:57 by ttuuxxx
slideshow ghunter
Another app is ghunter image viewer, its about 1/2 the size of viewnior and has all the same functions.

http://ghunter.googlecode.com/files/ghunter_0.0.5-1_i386.deb <-- download

http://code.google.com/p/ghunter/ <-- homepage

It wouldn't compile on 4 series but the deb package even works on 4 series, it makes a 36kb pet. I like it, its also really quick to launch images
ttuuxxx


Posted on 29 Dec 2010, 23:39 by Sage
How difficult ...
...would it be to auto-detect a sound ISA card? Is it possible?


Posted on 30 Dec 2010, 16:31 by broomdodger
ppm cursor invisible
wary500
In PPM if I search and nothing is found, the cursor is not visible within the PPM window but is visible in the error dialog or outside the PPM window.

Is this known?
-Bill


Posted on 30 Dec 2010, 18:21 by 01micko
re cursor
Yes broomdodger, I see it too, not just in Wary either (when an xmessage pops up). Maybe it should use gtkdialog-splash those messages?


Posted on 30 Dec 2010, 24:50 by Wayne foutz
flgrx 10.10 in the Package Manager?
I think you need to rethink this. I'm pretty sure, at least it's my experience, that installing anything later than fglrx 9.3 will break Xorg 7.3.


Posted on 31 Dec 2010, 3:58 by adi
old computers
I always wonder what is new talking about a PC. I am making a test now with a dell optiplex gx520 with celeron at 3G (it was sold in a second hand store) and I notice that wary 500 works well. I installed wary 500 on an usb flash (no hard drive left). Wary 102 had a problem with sound at reboot (the sound disappeared) but wary 500 succeed to keep it. I know how divers the hardware is on the pc market but a list of compatible hardware could be useful for wary. Can I try p3 or p2 with this first edition of wary? Happy New Year to all Puppy/Wary/Quirky lovers!


Posted on 31 Dec 2010, 5:37 by scsijon
server error plus
getting server errors on ibiblio for the iso's

so changed to nluug

however getting different hash's on that site for the iso's


Posted on 1 Jan 2011, 17:41 by Sage
Sound
AS reported, FULL install does not hold my ISA card sound settings. ???


Posted on 2 Jan 2011, 24:27 by broomdodger
flSynclient and Pentium II
Hi Barry

Thank you for suggesting Viewnior to run the slideshow.

It was a last minute New Years Eve success, projector hung with bailing wire and red duct tape. The old 300 MHz Panasonic Toughbook worked great. The cafe, India Joze, full of people.

The only problem I had with the Toughbook was 'flSynclient' refused to run. I like to turn off track pad tapping.

Is it because of the 300 MHz Pentium II? 'flSynclient' runs on all my old PCs. Let me know if I need to get the exact error message, the Toughbook is at the cafe.

Wary 500
Panasonic Toughbook, 300 MHz Pentium II, 192 MB ram, 10 GB hard drive

-Bill




Posted on 3 Jan 2011, 6:17 by BarryK
re flsynclient
Flsynclient is really Jemimah's baby. There has been a lot of development of Flsynclient discussed on the Forum, so with any luck maybe a search of the forum will turn up something on your Toughbook.

I have never used Flsynclient, always make sure I have a USB mouse.



Posted on 26 Jan 2011, 11:36 by ttuuxxx
Wary Saved the Day
Hi Barry as you know, 99% of the time I compile live, So I never use the menu to shutdown, I just hit the power on the tower and do a cold shutdown, I use my hard drives as archiving only. Never install anything.
So after almost 5 years using this hard drive with puppy I started getting a filesystem error that has 290GB of saved files on it, the error was ext3=fs error ext3_get_inode_loc <6>ata1: EH complete
basically It made the file system read only and when I backed up the hard drive around 30% of the files were dead links. That's a lot of stuff, So I tried a few fsck commands I found on google and they did nothing, but then I remembered that the latest Wary had a built in file system check I noticed last time I used it. So I figured why not try Wary, I did a frugal install, proper shutdown to make the pupsave, then rebooted, once The desktop was there I did a hard shutdown and rebooted, Wary automatically noticed that I did a improper shutdown and did a filesystem check.
Wary found and repaired 100% of the files. everything is working great again, I then backed up all the files.
Thanks for this Barry :) a great addition to puppy
ttuuxxx


Posted on 26 Jan 2011, 14:56 by BarryK
Re f.s. fix
ttuuxxx,
Well, that is a Woof feature. The really good news is that the f.s. check also works with a full hd installation -- which as far as I know, no other distro is capable of -- that is, a f.s. check of the partition that is being booted into. These are features of Woof since about 6 months ago.



Posted on 24 Feb 2011, 7:31 by phdzaps
tg3 driver
Hi,
I believe the tg3 driver needs to be updated,
both for wary and also lupu5.2
The particular system which it is for is a dell
optiplex 389
with the broadcom netlink gigabit ethernet (wired) card. I was able to get a driver from the broadcom site that I used to overwrite the lupu tg3 with, and it worked, but I can't get the same to work with the latest wary. Thanks.

Oh btw, wonderful work all with puppy!




Posted on 24 Aug 2011, 14:58 by Ryan Santos
No need to reboot after improper shutdown
Hi,

I am currently using wary puppy 5.0 full hd installation on a 1GB CF card. Is there a way after the scan is executed to continue booting up wary pupyy 5.0?

Our existing software uses WinXPE and it is able to boot up without any issues. Now we are using wary puppy 5.0 for our new system and want the same behaviour as in WinXPE with regards to improper shutdowns.



Posted on 24 Aug 2011, 16:21 by BarryK
Improper shutdown
I don't know what you are asking for. After and improper shutdown, Wary boots and does a filesystem check (in case of ext2 or ext3), then displays a message about the improper shutdown and option to drop to the console, which times out, and if I recall, then starts the desktop.

So, what is the problem?

The code that brings up the dialog asking about dropping out to console, is about line 351 in /usr/bin/xwin. I don't recall what changes there were back in 5.0. We are now up to 5.1.3.



Posted on 24 Aug 2011, 16:41 by Ryan Santos
Improper shutdown
It is not a problem for people with a keyboard and a mouse which is not available all the time on embedded systems so everything has to be automatic. I was able to do the following changes in an attempt to make things automatic

1. Instead of dropping to console I just deleted that if statement and replaced it with "rm -f /etc/.XLOADED" so it would proceed to xwin no matter what.

2. Reduced reboot wait time after filesystem check from 4mins to 1second

3. Reduced xwin waiting time from 30sec to 1sec.

Now, I think it would help if after the filesystem check it would go directly into the system just like what happens in ubuntu. So that it can keep up with another WinXPE machine which also had an improper shutdown. I was wondering what changes I could do to the /sbin/init to be able to do this.


Posted on 24 Aug 2011, 16:45 by Ryan Santos
Improper shutdown
#1 is around at line 337 for me of /usr/bin/xwin