Precise Puppy beta7

Here is what I hope will be the last beta of Precise Puppy. This is built with 3.2.29 PAE kernel (meaning it supports more than 4GB RAM).

Download:
http://distro.ibiblio.org/quirky/test/precise-5.3.95-beta7-pae/

Kernel sources:
http://bkhome.org/sources/kernel-3.2.29/
Us#er#na#me#: p#up#py P#as#sw#or#d: l#in#ux

I am also building beta7 with non-PAE kernel, targeting older hardware, including older video hardware, which will be uploaded soon.


Posted on 22 Sep 2012, 23:00


Comments:

Posted on 22 Sep 2012, 23:15 by BarryK
3.2.29 source sfs
The kernel source SFS file is also available here (97.4MB):
http://distro.ibiblio.org/quirky/pet_packages-precise/kernel_src-3.2.29-patched.sfs

Hmmm, I am taking a bit of a punt here. I normally do a frugal install of a build and give it a basic sanity test, before releasing it.
But this time I built it, beta7 that is, and uploaded it, and announced it here.

It is just that I have had so much going on the last couple of days, that the "sanity test" got missed out. Oh well, I will know soon enough.



Posted on 22 Sep 2012, 24:57 by peebee
Broadcom WL driver
Hi Barry

All seems fine here - only problem I have is that pnethood continues to be very very slow compared to other recent puppies.

I've compiled the Broadcom wl driver for k3.2.29 and uploaded the delta file that allows it to be installed onto Precise 5.3.95 here:

http://murga-linux.com/puppy/viewtopic.php?t=76495&start=17

I realise that my "model" of supporting many puppies and kernels with a single multi-kernel pet plus delta pets does not fit too well with the PPM model - so if you want me to build a driver pet just for Precise let me know - however in the future when you make Precise an official release I'll build the delta file into the driver pet (like Wary & Slacko now) so that the driver pet could then go into the repo?

Cheers
peebee


Posted on 23 Sep 2012, 6:56 by GCMartin
FirstRUN
Thanks Barry for this.

I am just now downloading before heading home. I will test tonight.

Was the issue with FirstRUN resolved, yet?

It is needed for setup when a Laptop user does NOT have a LAN cable installed in the PC when it is first booted.

Thaksn in advance


Posted on 23 Sep 2012, 8:42 by BarryK
Precise beta7 no-PAE
Ok, here it is:
http://distro.ibiblio.org/quirky/test/precise-5.3.95.1-beta7-nopae/

This is built with 3.2.30 kernel, source SFS (97.4MB):
http://distro.ibiblio.org/quirky/pet_packages-precise/kernel_src-3.2.30-nopae-patched.sfs

This build is a bit experimental for ATI/Radeon and nVidia video. I left out the 'nouveau' drivers, there is only the Xorg 'nv' driver. Radeon is setup for non-KMS.

The .iso file is a monster, 180MB. Mostly because the .sfs is gzip'ed rather than xz'ed, for better performance on slow systems.



Posted on 23 Sep 2012, 15:31 by Sage
" The .iso file is a monster, 180MB."
Ah, yes, - we enter the ultimate PC Paradox!
Did you say your first release was ~20Mb?
This industry will always catch out even the most accomplished coders. Landfill is destined to boom. Progress and capitalism are most uneasy of bedfellows. The latter tends to subvert the intellectual goals of the former.
Legions of PC users now have staggering capability sitting on their desks. And what for? Even email is morphing into Facetubebook; only browsing maintains its core function amongst the plebs. All of which can be achieved by a little gadget held in the palm.
Wants vs. Needs - what to do? Speak to any of your regular neighbours and discover most still using the devil's OS. They've been frightened off any alternatives, except those with money to burn on worthless fruit. And to a man/woman, they will in rare moments of honesty confess to 'having problems' with the technology. A cornucopia for IT-literate crooks living at 419.
Time to step back, see the big picture, re-affirm K.I,S.S., .iso <100Mb, deaf, dumb and blind to the go-faster kiddies who've got to have the latest gear(s). And, if one must, acquire an Android back-pocket wundermachinen...


Posted on 23 Sep 2012, 15:36 by Sage
...and
please don't confuse a legitimate poke at the industry and society with personal criticism. Quite the opposite, we are eternally grateful to those who grapple. Grapple on!


Posted on 23 Sep 2012, 18:25 by peebee
Broadcom wl for non-pae Beta 7
Broadcom wl delta for non-pae Beta 7 has been added


Posted on 24 Sep 2012, 7:00 by peebee
Revert to 2009 nbtscan
rcrsn51 has discovered and I have confirmed over on the forum that reverting nbtscan to the 2009 version found in Wary5.3 and Quirky cures the pnethood scanning performance problem.

The 2012 version of nbtscan provides OK performance in Slacko but not in Precise....

Cheers
peebee


Posted on 24 Sep 2012, 8:32 by BarryK
re nbtscan
peebee,
Thanks for that, I have fixed the package-list to use the old PET (from ibiblio 'common' repo) instead of the official DEB.



Posted on 24 Sep 2012, 12:23 by mavrothal
libLLVM
Talking about size, what pulled libLLVM, a 7MB compressed file, in 5.3.95 build? Was not in .93

Also, I do not know if this is by design or just not implemented, but /root/.packages/builtin_files appears to have info only for .pet but not for .deb packages installed in the build



Posted on 24 Sep 2012, 16:30 by BarryK
Re LLVM
mavrothal,
Beta6 does have LLVM. I think it was beta5 that didn't.

For the PAE-enabled build, I went over to using all .DEB video and mesa packages, and a few of them need LLVM. I think even the Xorg vesa driver needs it.



Posted on 24 Sep 2012, 16:45 by BarryK
Re builtin_files
mavrothal,
I just checked, everything is there. For example, 'alsa-utils' is a DEB.

What may be confusing you is that the files in /root/.packages/builtin_files are the generic names, that may have combinations of DEBs.

Look in /root/.packages/DISTRO_PKGS_SPECS, for example, this line:

yes|readline|libreadline6,libreadline6-dev,readline-common|exe,dev,doc,nls

...the generic name is "readline", and you will find /root/.packages/builtin_files/readline.

There are various reasons for doing it this way. One of them is because Debian and Ubuntu split the original package (for example 'readline') up into many, and they give those many pkgs very odd names.

But, if you ever need to figure out what are the original DEBs, the info is there in DISTRO_PKGS_SPECS file.




Posted on 25 Sep 2012, 3:47 by mavrothal
missing
I'm not sure if my scripting is correct but on a fresh boot of 5.3.95 the command
for i in `ls /usr/lib | cut -f 1 -d '.'`; do if [ "`cat /initrd/pup_ro2/root/.packages/builtin_files/* \

| grep $i`" = "" ] ; then echo $i missing; else echo $i OK; fi; done | uniq | grep missing

Produces a list of over 300 shared libraries that can not be identified in /root/.packages/builtin_files/


Posted on 25 Sep 2012, 21:16 by BarryK
re missing
mavrothal,
Yes, you are right.

It is the symlinks in /usr/lib, /lib and /usr/bin that are used to workaround the Debian/Ubuntu "multiarch problem", that have broken the code in script 3builddistro (in Woof) that creates the builtin_files contents.

I have fixed it, see Woof commit:
http://bkhome.org/fossil/woof2.cgi/info/b558ac9d69



Posted on 27 Sep 2012, 4:55 by jackstraw65
precise feedback
i like this puppy. skype works camera and all. chrome installs easily and gnome plays my wma files. My only problems is that I have become addicted to freecell and I am having problems downloading it. I just seems faster than the others idk. I am running this off dvd made one save for setup now I am good to go.


Posted on 27 Sep 2012, 10:26 by BarryK
Precise beta7 Forum feedback
I should mention that Forum feedback for beta7 starts in this thread, page 44:
http://murga-linux.com/puppy/viewtopic.php?t=76961&start=645



Posted on 29 Sep 2012, 2:19 by mavrothal
still missing
I tried the same trick with a fresh racy-5.3.90 and the following libraries in /usr/lib can not be identified in /root/.packages/builtin_files/

gcrt1 libanl libao libasound libBrokenLocale libcrypto libcrypt libcupscgi libcupsdriver libcupsimage libcupsmime libcupsppdc libcups libdl libgailutil libgdk libgio libgmodule libgnomecanvas libgoffice libgthread libgutenprint libgutenprintui2 libnsl libpthread libresolv librsvg librt libspreadsheet libthread libutil

Only 30 some, but still. Makes it difficult if you want to remove packages.


Posted on 30 Sep 2012, 16:51 by apt514
GYV
Please compile a 3.0.2 GTK-YouTube-Viewer pet for ftp precise puppy mirrors.
http://code.google.com/p/trizen/ I d/l 2.0.3 & 3.0.2 pet patch from a forum.
GTK YT V http://www.murga-linux.com/puppy/viewtopic.php?t=76835
API Patch http://www.murga-linux.com/puppy/viewtopic.php?search_id=1658757947&t=81147



Posted on 10 Oct 2012, 7:01 by BarryK
Re still missing
See:
http://bkhome.org/blog/?viewDetailed=03021