Precise Puppy 5.7

This is going to take everyone by surprise! I decided that 5.7beta2 is pretty good, so haven't bothered with an RC. Here is a short announcement:

Another pup in the Precise series! This pup comes in two flavours, one for older hardware and/or those on dialup Internet, the other for those with relatively modern hardware.
The "retro flavour" is an upgrade path for those who have used our Wary Puppy, that targeted older PCs and analog modem dialup -- unlike most other Linux distributions, it continues to support a wide range of analog "winmodems". It also has two web browsers, SeaMonkey and Opera, the latter preferred for PCs with less than 256MB RAM.
The "modern flavour" only has one browser, SeaMonkey, and forgoes most of the analog modem and true-SCSI drivers, and is the choice that will suit most people with a PAE-capable i686 CPU, no ISA cards, and 256MB or more RAM. You also get the benefit of a much smaller download, the live-CD .iso file is 155.7MB.
There are many fixes, improvements and new features in this pup, and the release notes give details. In particular, there are exciting new features at the underlying "Woof-level", or infrastructure-level, such as the more efficient pup_event daemon and IPC mechanism, and support for running Internet applications as user 'spot'.


Full announcement and release notes:
http://distro.ibiblio.org/quirky/precise-5.7/release-Precise-5.7.htm

Download from here:
http://distro.ibiblio.org/quirky/precise-5.7/

Choosing a flavour
Regarding which .iso file to download, if you are a Linux newbie and have an "older" PC and don't know whether it is PAE-capable, or has ISA-bus cards, play safe and choose the "retro flavour". It is the same in all respects to the main, regular flavour, except has many more 3rd-party drivers for analog modems and true-SCSI drives, plus a slightly earlier kernel version.

The release notes mention that the regular flavour would be your choice for a PC with 1.5GHz CPU and 512MB RAM or more, but I have quite happily run it on a system with 256MB RAM. However, definitely not less than 256MB, as SeaMonkey 2.19 is a resource hog and in less than 256MB RAM will be extremely slow, with much disk swapping. The Retro flavour has both SeaMonkey and Opera, the latter being better in limited resources.

A warning if you try both: booting off CD, at first shutdown you are asked if you want to copy the .sfs files off CD to hard-drive -- if you reply 'yes', but you then want to try the other flavour, be sure to first delete it off the hard drive. You will find it in the partition in which you created the session save-file, as /puppy_precise_5.7.sfs.

The theme
The release notes describe the theme, with acknowledgements to the original authors. Thanks guys!
I have modified the original component themes and created a combined overall theme that is... well, I like it anyway. The orange menu button will probably provoke some comments!


Posted on 29 Jul 2013, 6:52


Comments:

Posted on 29 Jul 2013, 7:42 by BarryK
Precise 5.7 Forum feedback
I have started a thread on the Forum for feedback:

http://murga-linux.com/puppy/viewtopic.php?t=87712



Posted on 29 Jul 2013, 8:01 by darry1966
Congrats
Well done Barry after a lot of hard work congrats.


Posted on 29 Jul 2013, 11:04 by GCMartin
Another great effort for community benefit
Thanks Barry for what you do for our benefit.

Its your contribution to the world. I applaud YOU!


Posted on 29 Jul 2013, 16:16 by BarryK
USB optical drive not detected
rcrsn51 has reported that a desktop drive icon for a USB otical drive does not appear, though Pmount can mount it.

I used to have one of those, but it got taken back when my house was burgled, just over two years ago:
http://bkhome.org/blog/?viewDetailed=02300

I really do need to have one of those for testing. OK, I will go out tomorrow and purchase one.



Posted on 29 Jul 2013, 16:17 by aarf
http://puppylinuxstuff.meprecise-5.7.iso.torrent
http://puppylinuxstuff.meownplanet.net/aarf/precise-5.7.iso.torrent
boots. slick work. posted with frisbee wifi



Posted on 29 Jul 2013, 17:58 by BarryK
Bought USB DVD drive
OK, I went out and bought one, got it from these guys for $39:
http://www.austin.net.au/cd-dvd-blu-ray-burners/samsung-se-208abtsbsa-slim-external-8x-dvd-wr.html

Yep, I can confirm this bug. Will look into it.



Posted on 29 Jul 2013, 22:11 by BarryK
Service Pack 1
10pm and I have not yet had my evening meal!

There is a Service Pack, fixes a couple of optical media bugs:

http://bkhome.org/blog2/?viewDetailed=00341



Posted on 29 Jul 2013, 24:12 by broomdodger
retro high memory use
retro high memory use

Precise 5.7 retro
manual frugal

Boot, savefile, and restart
Precise 5.7.00 memory usage 554 MB
Precise 5.6.11 memory usage 184 MB

When Precise 5.7 starts it displays something I have never seen when a savefile is present: (the 'copying to ram' part)

Loading the 'puppy_precise_5.7.sfs' main file... copying to ram

Is it loading the sfs twice?

Bill



Posted on 30 Jul 2013, 9:06 by BarryK
Re copying to ram
broomdodger,
That was a change in 5.7final. The sfs defaults to being copied to ram if there is plenty of ram, that is, more than 700MB free.

You now need a boot param "puppy pfix=nocopy" to prevent that.

No, it is not getting loaded twice.



Posted on 30 Jul 2013, 13:21 by broomdodger
Re copying to ram
Barry wrote: You now need a boot param "puppy pfix=nocopy" to prevent that.Setting nocopy for Precise 5.7 brings initial RAM usage back down to near the same as Precise 5.6.11 that is... 199MB rather than 554MB with copy.

Is copying to RAM mostly an advantage for flash installation?



Posted on 30 Jul 2013, 18:39 by BarryK
Re copy to ram
No, the only reason for copying the sfs file to ram is that it might be a bit faster reading it, during usage, for example, starting an application.
So, if there is plenty of ram, why not?

If the file is on a HD, and copied to ram, it might reduce HD accesses.



Posted on 30 Jul 2013, 24:34 by broomdodger
f2fs
Barry

The EeePC has only an SSD.

Do you consider f2fs ready to use?

Should I copy everything off, reformat f2fs and copy back.

http://bkhome.org/blog2/?viewDetailed=00119

Bill




Posted on 30 Jul 2013, 24:34 by Terryphi
UK Keyboard bug
Restart X server is resetting to default US keyboard layout but corrects itself to selected keyboard layout after any program receives keyboard input and is closed. (See Forum posts.)


Posted on 31 Jul 2013, 4:50 by pemasu
keymap bug
Also in Upup Raring is somekind keymap bug. Charlie6 has studied be-latin1 keyboard problem. Rox-filer > right click > rename does not use be-latin1 azerty but is stubbornly qwerty. The bug has been seen also with geany. keymap-set command has been needed. I have thought about connection to quicksetup keymap-set connection with the problem, but better people than me is needed to narrow the reason.


Posted on 31 Jul 2013, 9:00 by BarryK
Re f2fs
broomdodger,
I don't know, I only tried it briefly. Others on the Forum have reported that they are using it.

This keyboard bug, is this something new? If so, I don't see how that could be, as I haven't made any changes in that area.

Unless something has changed in the kernel. Even the 3.2.48 kernel could have had something applied to it that is backported from later kernel.



Posted on 31 Jul 2013, 12:53 by pemasu
re keymap bug
I have noticed the reports only from Upup Raring, kernel 3.9.9, woof used at the time, before new Precise development. Jwm 835.
I have noticed that some times, keyboard defaults back to en_US for me. It happens randomly, now I havent had it days....

Here is charlie6 report:
http://www.murga-linux.com/puppy/viewtopic.php?p=714920#714920
Strange.


Posted on 31 Jul 2013, 18:27 by 01micko
re f2fs
@broomdodger

The latest slacko beta is geared up to run a FULL install from f2fs. Your mileage will vary depending on the media type as to how fast it runs. On my eee-701sd I dd'd a stick prepared with my f2fs_installer straight to the SSD and it works fine, however f2fs, IMHO, is still to be considered 'experimental'.
In June they finally brought fsck to f2fs so that shows signs that it is maturing.
Note, there is a severe storage penalty to be paid because of the logging nature of the filesystem. You stand to lose somewhere around 11% of available storage. Also note that it isn't supported by any bootloader as yet so you need to boot from a recognised filesystem (vfat, ext2, whatever you choose).

In the future I'd like to see either (or both) the ability to save to an f2fs save file or mounting of an f2fs partition as an AUFS layer.


Posted on 32 Jul 2013, 8:15 by Jades
Anoher kernel panic on K6-2 500
First attempt at booting Retro version on K6-2 500 bombed out with a kernel panic on pfix=ram boot off CD. Checking disc on Pentium D to see if it works.

It would be helpful if there was an explicit check for CPU features as part of the boot sequence like recent builds of Upup Raring and Slacko - those halt and state they can't continue due to lack of cmov.

Will post more on forum thread.


Posted on 32 Jul 2013, 8:21 by Jades
Can't reproduce UK keyboard problem
On my Pentium D machine, which can boot 5.7 Retro, I can't reproduce the UK keyboard problem others have reported. Keyboard is a Genius KB-06X connected directly to the PC's PS/2 port. Perhaps the problem is interface-specific?


Posted on 1 Aug 2013, 11:44 by BarryK
Re keyboard layout bug
Yes, I can reproduce this. I tried all sorts of things, bug is still there.
It is not in recent Slacko builds, which hints that problem is in a recent Ubuntu DEB. I just don't know.

I am building Racy with latest Woof, to find out if there is anything in Woof that is the cause. Or maybe a change in a PET.
Building Racy now, will report back.




Posted on 1 Aug 2013, 11:50 by BarryK
Keyboard layout announcement
To everyone out there, just to let you know what this bug is:

If you choose a non-US keyboard layout, the first application that you start will still have US layout. If you type something, then quit, then start any application, the keyboard layout will be correct.

This problem occurs at every bootup.

At this stage we haven't got a clue what is causing this. The workaround for now is, after bootup, click on, say, the "edit" icon, type anything, quit, then your keyboard layout will be correct.

Yeah, I know, very annoying.



Posted on 1 Aug 2013, 12:24 by BarryK
Racy OK
I have built Racy from Woof, and non-English keyboard layout works properly.

This is now pointing very strongly to an Ubuntu DEB in the 'precise-updates' repo.
I will now do a test build of Precise using the same DEBs as used for Precise 5.6.1.



Posted on 1 Aug 2013, 15:43 by BarryK
non-US success
Just reporting in briefly, got other things to do this afternoon.

Note, in previous comment, that should have been "non-US" layout, not "non-English".

I have rebuilt Precise 5.7, but using the DEBs used to build Precise 5.6.1. Guess what... success!

With each build of Precise, I use the DEBs from the 'precise-updates' repository. Well, it seems that someone has stuffed up, one of those updates is causing the problem.

The build with the slightly older DEBs works fine, no problem with non-US keyboard.

I suppose that we could narrow it down, find all changed DEBs since Precise 5.6.1. Do the same for Upup. Take out those highly unlikely to be responsible, then install the older DEBs until the problem goes away. Then we should have determined the culprit -- then we go and tear strips off the developer responsible



Posted on 1 Aug 2013, 19:04 by Annie_LINUX
what about other usb drives?
HI baz :)

just wondering if you have tested any usb-to-sata
or usb-to-ide connected drives as i use one of these to mount hdds an optical drives via usb to desktops an laptops when needed

im sure i used one of these with older pup versions
with no issues,

one thing that did come a croper with older versions of pup was mounting sd cards via the internal slot in my compaq an fuji siemens machines, some times it would find them an i could mount them, some times i would need to eject the sd card an re insert it a number of times before i could get it to pick it up, other times i could not get it to show up, an then i left it inside an did a reboot an it was ok an mountable :) im going to try the latest iso today
ive got a spare 32gb sd card to test later ile try it out an post up any issues :) thanks for all you efforts with puppy barry an every1 else in the community who helps out your all stars in my world :o)


Posted on 2 Aug 2013, 10:21 by BarryK
Precise 5.7.1 soon
Notice to everyone!

Precise Puppy 5.7.1 is due out very soon. It has some important bug fixes, so you might want to wait for it. Should be out tomorrow.



Posted on 3 Aug 2013, 8:10 by BarryK
Precise 5.7.1 released
Announcement:

http://bkhome.org/blog2/?viewDetailed=00346